มิเตอร์วัดความแข็ง Shore D Digital Shore D Hardness Durometer (HT-6510D)

Digital Shore D Hardness Durometer (HT-6510D)

13,000 บาท

ผมอนันต์ครับ Tel. 086-8910596



LIGHT & COMPACT DUROMETER WITH BUILT-IN PROBE!

HT-6510D is a pocket size digital durometer type D with Integrated or Built-in Probe and specifically designed to determine a specific scale. The resistance toward the indentation of materials that range from Plastics, Formica, Epoxies and Plexiglass are measured quickly and effectively with this precision perfect instrument. It measures the depth of an indentation in the material created by a given force on a standardized presser foot. This testing equipment is fully equipped with an indenting foot of hardened steel rod with a 30° conical point and 0.1 mm radius tip and is capable of producing a value from 0 to 100, with higher values indicating a harder material. The LCD digital display features bold, easy to read numbers indicating a specific value, with a 0.1 resolution. It includes an exclusive built-in Microcomputer LSI circuit advanced microprocessor technology and crystal time base that quickly provide measurement readings with the highest level of accuracy and with no guessing errors in less than a second. The results obtained from this test are a useful measure of relative resistance to indentation of various grades of polymers, elastomers and rubbers. The results obtained from this test are a useful measure of relative resistance to indentation of various grades of polymers, elastomers and rubbers. It can measure the penetration hardness of hard rubber, plastics, and substaces such as acrylic, delrin, kevlar, pvc, nylon, lexan, epoxies and similar materials. In addition, we constantly keep in mind that the safety of the user should always comes first and so we made sure that our products comply with all the necessary health and safety required standards set by the European Directives. Certified to meet the following rigorous standards of ISO-7619 and ISO-868, DIN53505, ASTM D2240, and JIS K7215 set standards. It is recommended that measurements be made with the type D durometer when the value is above 90 HA, and with a type A durometer when the value is less than 10 HD.

Features: With INTEGRATED (built-in) PROBE and designed to determine the hardness of Plastics, Formica, Expoxies and Plexiglass Equipped with wide measuring range and high resolution Conforms with the essential health and safety requirements set out by the European Directives along with ISO-7619 and ISO-868, DIN53505, ASTM D 2240, and JIS K7215 set standards Uses Microcomputer LSI circuit and crystal time base to offer high accuracy measurement & fast measuring time Uses operation stand capable of applying the specimen to the indentor with sufficient recommended force that allows accurate and repeatable hardness tests to increased stability and maximum repeatability Automatically switch off after about 2 minutes and also gives you the freedom to manually switch it off anytime to conserves batteries Delivers ultra accurate reading with no guessing errors Features instant, easy to read, legibly written results indicating a specific value, with a 0.1 resolution Complete with FREE sturdy carrying case with contoured rubber compartments that fits the device perfectly, sandwiched between rubber & foam when closed to achieve optimum shock absorption Use anywhere and suitable for use in the laboratory or in field conditions Specifications: Test scale: Shore D Hardness Standards: DIN53505, ASTM D2240, ISO 7619, JIS K7215 Parameters displayed: hardness result, average value, max. value Measurement range: 0-100 H (Shore D) Microcomputer: Newly developed microcomputer delivers maximum results Measurement deviation:  error <= +/-1 Resolution: 0.1 H Temperature Operating conditions: *0 - 50°C Humidity Operating Conditions: <80% Display: 4 digits, 10mm LCD Power supply: 4 x 1.5V AAA (UM-4) battery Battery indicator: low battery indicator Power off: manual or auto after 10 minutes Dimensions: 162mm x 65mm x 38mm Weight (without batteries): 170g DUROMETER OF VARIOUS COMMON MATERIALS Material Durometer Scale **Solid truck tires 50 D **Hard Hat 75 D   Accessories included: FREE Test block FREE Wrist Strap Hard plastic carry case with padded & contoured interior Instruction manual

The Product