มิเตอร์วัดความทนทานแบบดิจิตอล ,Digital Shore Hardness Durometer

เครื่องวัดค่าความแข็งShore A,  Shore D สำหรับยาง พลาสติก หนัง 

Digital Shore A Hardness Durometer (0~100HA)

(Model: HT-5610A)

(Model: HT-5610D)

ผมอนันต์ครับ Tel.0868910596  3,800 บาทครับ

This Shore A Digital hardness durometer is used to measure the hardness of rubber and plastics

according to ISO 868-1986 and ISO 7619 It has 8.1N total measure force, 1kg outside pressure,

pressure needle top cone angle of 35°, 2.5mm needle length, 0~100HA dial scale and and features

large LCD display for easy reading. It can be use as portable or desktop. Type A durometers is

applicable to test the penetration medium hardness of rubber, plastic, leather, multi-grease, wax,

etc.

It corresponds the rigorous standards of ISO 868-1986 for Plastics and Rigid rubber and ISO

7619 Rubber in measuring indentation's hardness as well as GB/T 531.1-2008 standard. The

measured hardness of a body makes possible conclusions on its characteristics e.g. about how

quickly it breaks or is being scratched.

NOTE: ¹ A minimum thickness of 6mm as sample test probes is recommended for

measurement's optimal results (if its less you may add more layer but should be not

****** ** more than 3 layers) and measuring point of at least 18mm distance from the

outside edges.

******* ² It is recommended that measurements be made with the type D durometer when

the value is above 90 HA

Special Features

• Dial Scale is 1-100HA
   
• High grade probe with 0-2.5mm Pointer journey
   
• Wide measuring range with high resolution and ease of operation
  
• 35º included angle with 0.5HA resolution
   
• Hold Function
  
• With Zero setting
  
• Clear test value
  
• Stress at the end of pointer: 8.1N
  
• Easy to read large LCD display
  
• Delivers ultra accurate reading
  
• Battery operated
  
• Small in the dimension, lightweigt and can easily be transported
• Passed and conforms with ISO 868-1986 & ISO 7619 international standards
  
• Comply with GB/T 531.1-2008 standard
  
• With CE Marking, conforms with European health & safety requirement
  

Specifications

• Resolution: 0.5HA
  
• Total measure force: 8.1N
  
• Outside pressure: 1kg
  
• Pressure needle top cone angle of 35°
  
• Needle length: 2.5mm
  
• Flat cone point: φ0.79mm diameter
  
• Dial Scale: 0~100HA
  
• On/Off Switch
  

1).SHORE-A DUROMETER :It is designed for testing the hardness of soft rubber,printer

roller and other elastomer material.(ASTM--D--2240)

2).SHORE-D DUROMETER:It is designed for testing the hardness of hard rubber,such

as:thermoplastic plastics,bowling,plastic floor and so on.(ASTM--D--2240)

3).SHORE-O/ DUROMETER:It is designed for the hardness of soft and elasticty material,spinning trunk rotation

and soft grain structure materials.(ASTM--D--2240)

Set Includes

• 1 x Digital Shore A Hardness Durometer
   
   
  มีให้ท่านเลือกสองรุ่นครับ สำหรับดิจิตอล Shore meter คือมี Shore A
   
  และ Shore D ใช้งานง่ายราคาไม่แพงจนเกินไปครับ ใช้วัดยาง พลาสติก
   
  สิ่งของที่ต้องการทราบความแข็งหรือความทนทานครับ